Jak zprovoznit Lilliput USB monitor?

Dobře, právě mám Lilliput 7″ USB monitor:

_{(zdroj:thinkgeek.com)}

Bohužel mám problémy s tím, aby to fungovalo v Ubuntu.

Je to zařízení DisplayLink, takže by mělo fungovat v Ubuntu.

Zde je výstup lsusb :

…
Bus 002 Device 007:ID 17e9:02a9 Newnham Research
…

Upravil jsem svůj xorg.conf soubor pro umístění zařízení.

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  ([email protected])  Fri Apr  9 11:51:21 UTC 2010

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  ([email protected])  Fri Mar 12 02:12:40 PST 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "DisplayLinkScreen" 0 0
    Screen      1  "Screen0" RightOf "DisplayLinkScreen"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LPL"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "BenQ T705"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400M GS"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400M GS"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "CRT: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

#################################################

Section "Files"
ModulePath      "/usr/lib/xorg/modules"
ModulePath      "/usr/local/lib/xorg/modules"
ModulePath      "/usr/local/lib/xorg/modules/drivers"
EndSection

############### DisplayLink Stuff ###############
Section "Device"
    Identifier      "DisplayLinkDevice"
    driver          "displaylink"
    Option  "fbdev" "/dev/fb1"
EndSection

Section "Monitor"
    Identifier      "DisplayLinkMonitor"
EndSection

Section "Screen"
    Identifier      "DisplayLinkScreen"
    Device          "DisplayLinkDevice"
    Monitor         "DisplayLinkMonitor"
    DefaultDepth    16
    SubSection "Display"
        Depth   16
        Modes   "800×480"
    EndSubSection
EndSection

Vše, co dostanu, je zelená obrazovka.

Jakýkoli oceníme tipy nebo rady!

Aktualizace: Zjistil jsem, že X11 má potíže s nalezením displaylink_drv.so modul, tak jsem to opravil. Pak se můj XServer úplně zhroutil. (Myslím, že chyba segmentace.)

Teď jsem opravdu zmatený.

Přijatá odpověď:

Ve skutečnosti to funguje... a jediné, co jsem udělal, bylo obnovení xorg.conf.backup . Podivný. No dobře.